Specification: Solid steel 16mm diameter infill bars, heavy duty construction 25mm x 25mm box section frames.
Measurements: All sizes refer to actual openings and not the gate, fence or rail width; we have already allowed for hinges etc.
Adjustable hinges for levelling on installation.
All Corfe gates have the closing bolt on the right hand side when viewed from the road.
Fittings: All gates are supplied with a pack of screw-on/bolt-on fittings to fix to existing timber or brickwork.
Opening directions: All single, low bow, bow top gates are supplied with a universal latch for left/right hand opening. All doubles have the latch on the right hand leaf when viewed from the road. All Corfe and Balmoral gates have the padlockable bolt on the right hand side when viewed from the road.
Square steel posts: due to the weight of the gates, care must be taken to ensure that the brickwork is strong enough to support them. The steel posts are to be concreted into the ground and are recommended for all large gates. Should you wish to hang the gates on steel posts then please allow for the post width, e.g. an 8ft opening pair of gates and two 3in posts will fill a 8ft 6in gap.
Finishing: All gates are primed in black and after fitting a further coat of good quality gloss paint is required.
An installation service is available for North Hertfordshire area.
Most gates, fencing and railings are available ex-stock, allow for 7-10 days UK mainland delivery.
For any bespoke sizes please email us with your post code and contact details and state all sizes + quantity you require and we will get back to you with your price. Remember delivery is included!